Electrical problems don't wait, and neither do we, which is why Madison Electrical Company handles the full range of residential and commercial electrical work across Madison and the surrounding area. Whether a breaker keeps tripping, a panel needs replacing, or a property is ready for new wiring, we scope the job on the phone and get it scheduled. From routine repairs to service upgrades and everything in between, we work with homeowners, landlords, property managers, and businesses every day of the week, 7:00 AM to 8:30 PM.
Breakers that hold. Outlets that work. Lights that stay on.
Call (256) 594-9198 for a quote.
Every home's wiring tells a different story, and the symptoms that send people searching for an electrician cover a wide range. Flickering lights that come and go. A dead outlet that stopped working overnight. A breaker that trips the moment you reset it. A burning smell near a receptacle, or a sparking outlet that needs attention right now. No power in one room, or half the house suddenly dark with no clear reason.
A diagnostic visit starts with a conversation about what you are seeing and when it started. From there, we trace the circuit, check connections, and test the components involved. Arc-fault and ground-fault breakers are often part of the picture, either as the source of a nuisance trip or as a protection upgrade that belongs in the solution. GFCI and AFCI protection near kitchens, bathrooms, and outdoor areas gets checked as part of any thorough troubleshooting visit.
You get straight answers about what is causing the problem before any work begins. We show up ready to work.
An older panel that cannot carry modern loads shows up in familiar ways. Breakers that will not reset. Circuits that share more than they should. A 100-amp service that made sense decades ago but cannot handle a home office, a second refrigerator, and a new HVAC disconnect at the same time. When the panel itself is the problem, replacing or upgrading it is the right answer.
We handle breaker panel repair, full panel replacement, and 200-amp service upgrades. For properties where demand has grown, subpanel installation adds capacity without a full service-entrance overhaul. Commercial clients with expanding power requirements get the same treatment: load calculations, service-entrance and meter upgrades sized to what the building actually draws.
The scope of the electrical work is priced before it starts, so you know what the job covers before anything is scheduled.
From a single GFCI outlet to a whole-home rewire, the first step is the same: a clear picture of what the job involves and what it will take to do it right. Outlet and switch work is the most common residential call we get, and for good reason. A kitchen that needs GFCI protection near the sink. A bathroom outlet that stopped working. A USB outlet in a home office. A weatherproof outdoor receptacle for the back patio. A dimmer switch that needs replacing or a new one installed where there was none.
Lighting follows the same pattern. Recessed LED lighting in a living room or kitchen, under-cabinet lighting over a workspace, landscape lighting wiring along a walkway, a security light or motion sensor light on the exterior. Adding a circuit is often simpler than people expect. We confirm what the panel can carry, run the circuit, install the fixture, and test the result.
We'll sort the wiring and clean up after.
Ceiling fan installation is one of the most requested jobs in this area, and it is easy to see why. A fan that moves air in a room with Alabama summers behind it earns its keep. Whether it is a replacement for an existing fixture or a new installation where only a light box existed before, we handle the wiring, the box, and the connection.
Dedicated circuits matter most when a major appliance is involved. A dryer outlet, a 240-volt outlet for a range, a laundry room circuit that does not share load with anything else. When new equipment goes in, the circuit feeding it needs to match. We assess what the panel can support, run the dedicated circuit to the right spec, and install the outlet to match the load.
Straight answers about your panel and wiring are part of every visit, not an add-on.
Older homes in the Madison area carry wiring that was never designed for today's electrical loads. Knob-and-tube wiring from the early and mid-twentieth century lacks a ground conductor and was not built for the amperage modern households draw. Aluminum wiring from the 1960s and 1970s carries its own set of connection risks. Either one can be a concern for insurers, buyers, and anyone planning a renovation.
A whole-home rewire replaces the branch circuits throughout the house with modern, grounded wiring. A partial rewire addresses specific areas or circuits where the risk is concentrated. Aluminum-wiring remediation can often be handled connection by connection rather than a full replacement, depending on the scope.
An electrical safety inspection is a natural starting point for older homes, rental properties, and pre-purchase due diligence. It gives a clear picture of what the wiring involves, what meets current standards, and what needs attention. We make the fix and leave it tidy.
Level 2 EV charger installation starts with the panel. A 240-volt dedicated circuit is the foundation, and the panel needs capacity to carry it. We assess the service, confirm what the panel supports, run the circuit to the garage or driveway location, and install the outlet or hardwired connection the charger requires. If the panel needs an upgrade first, we handle that as part of the same job.
Generator hookups work through the transfer switch. The switch is what keeps the generator isolated from the utility line and allows it to feed the circuits in your home safely. We wire the transfer switch, connect it to the panel, and run the dedicated circuit the generator needs. Prompt response, even for last-minute electrical calls, matters most when a storm has already knocked out power and a generator is sitting in the garage waiting to be connected.
Madison and Madison County sit in a part of Alabama where the electrical demands on a home are shaped by the climate as much as by the age of the house. Storm season runs from June through November, lightning is frequent through the summer, and year-round heat puts sustained load on air-conditioning circuits. Backyard pools are common. The three services below come up regularly here, and each one has a specific electrical scope.
When power goes out during a summer storm, the question is not whether a generator matters but whether it is wired correctly. We handle the transfer switch installation, the panel connection, and the dedicated circuit that feeds the generator's input. The transfer switch is what makes the system safe, keeping utility and generator power from meeting on the same line. We size the circuit to match the generator's output and confirm the panel can support the configuration before anything is connected.
Alabama's storm season brings frequent lightning, and a single strike on or near a property can send a voltage spike through every circuit in the building. Whole-home surge protection installed at the panel level catches that spike before it reaches appliances, electronics, and wiring. It works alongside grounding and bonding to give the excess voltage a controlled path. We install surge protection at the service entrance and can add point-of-use protection at sensitive circuits where the equipment warrants it.
A residential pool or spa needs dedicated circuits for the pump, the heater connection, and any lighting around the water feature. GFCI protection is required near water, and the wiring that serves pool equipment has to meet specific separation and depth requirements. We run the circuits, install the GFCI protection, and wire the exterior lighting around the pool area. With pools common across Madison and the surrounding neighborhoods, this is work we handle regularly.
Calling an electrician doesn't have to be stressful, whether you manage a single rental unit or a commercial building with multiple tenants. We work with property managers, landlords, and business owners on the same range of jobs we handle for homeowners: panel upgrades, outlet and switch installation, commercial lighting, circuit additions, and electrical repairs.
Rental properties need electrical inspections before a new tenant moves in, after a renovation, or when a problem gets flagged during a walk-through. Commercial clients adding equipment or reconfiguring a space need a panel that can carry the new load and circuits run to the right spec. Built for homeowners. Ready for property managers. Ready for your panel.
We keep you informed from diagnosis to final test, so there are no gaps between what was found, what was done, and what the result looks like.
From a single GFCI outlet to a whole-home rewire, the first step is the same: a call that covers what the job involves and what it will cost. When you call for a quote, the conversation covers the scope, the work involved, and the price. The scope of the electrical work is confirmed before anything is scheduled, so you are not committing to a job you have not had explained to you first.
We are available 7:00 AM to 8:30 PM, every day. Whether the call is for a routine outlet replacement or a panel upgrade that has been on the list for a while, the process is the same. Describe what you are seeing, get a price on the call, and schedule when it works for you. Electrician costs vary by job type and scope, which is why the quote happens before the visit rather than after.
We serve Madison and the communities around it throughout Madison County and the broader North Alabama area. That includes Huntsville, Athens, Harvest, Meridianville, Toney, Hazel Green, New Hope, and Decatur. If you are in the area and need electrical work, call for a quote and we will confirm coverage when you reach us.
Yes. We work with homeowners, landlords, property managers, and business owners throughout Madison and Madison County. The process is the same regardless of property type: the job gets scoped on the call, the price is confirmed before anything is scheduled, and the work is done to current code.
We are available every day from 7:00 AM to 8:30 PM, including Saturdays and Sundays.
If an outlet stops working or a breaker will not reset over the weekend, call (256) 594-9198 and we will work through the scope and get it on the schedule.
The first step is a phone call. When you call, we ask about what you are seeing, scope the job, and give you a price before anything is confirmed. From there, you choose when to schedule, and we take it from there.
It helps to know where the problem is showing up, when it started, and whether it is affecting one outlet or circuit or something broader. If you have had recent electrical work done or know the age of your panel, that is useful too. The more you can describe, the more accurately we can scope the job on the call.
Once the scope and price are settled on the call, you pick a time that works and we schedule the visit. If the job requires a look before a final price can be confirmed, we explain that up front before anything is booked.
It depends on the job and the current schedule. Routine work like outlet replacements, ceiling fan installations, and panel inspections can often be scheduled within a few days. For more involved jobs like panel upgrades or rewiring projects, calling a little ahead gives us time to confirm the full scope before the visit.
The scope and rate are confirmed before the visit is scheduled. If something unexpected comes up once the work is underway that changes the scope, we explain it before proceeding. You are not committed to work you have not had explained to you first.
A breaker that will not stay on is telling you something. It may be a circuit that is carrying more load than it was designed for, a faulty breaker, or a wiring problem further down the circuit. Continuing to reset it without finding the cause is not a safe long-term approach. Call and describe what is happening, and we can scope a diagnostic visit.
Common signs include breakers that trip regularly, outlets that do not work or feel warm, flickering lights, or a panel that has not been looked at in many years. Homes in Madison County built before the 1980s sometimes carry knob-and-tube or aluminum wiring that warrants a closer look. An electrical safety inspection is a practical starting point and gives you a clear picture of what is in place.
Coverage and any applicable travel considerations are confirmed when you call. We serve Madison and the surrounding communities throughout Madison County, including Huntsville, Harvest, Meridianville, Hazel Green, Athens, and the broader area.
Call (256) 594-9198 and we will confirm whether your address is within our service area.
We are available every day from 7:00 AM to 8:30 PM, which gives most homeowners and property managers flexibility to schedule outside of a standard nine-to-five window. When you call, let us know what times work best and we will find a slot that fits.
Access to the work area is needed to complete the job. If your situation requires coordination around someone being present, let us know when you book so we can plan accordingly. We confirm the visit before the electrician heads out.
Madison Electrical Company handles repairs, panel upgrades, wiring, lighting, EV charger installation, generator hookups, and everything in between. We are available 7:00 AM to 8:30 PM, every day, for residential and commercial calls across Madison and Madison County.
Call (256) 594-9198 for a quote.
We'll sort the wiring and clean up after.
Electrical work covers a wide range of jobs, from swapping a single outlet to upgrading the service entrance on a property that has outgrown its original panel. We handle all of it across Madison and the surrounding Tennessee Valley, every day from 7:00 AM to 8:30 PM. The table below lays out what each service covers, who it fits, and what is worth knowing before you call. When you are ready to move forward, a phone call is the fastest way to get a scope and a rate.
| Type of Work | What the Job Involves | When You Need It | Good to Know |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular |
| Homes adding major appliances, EV chargers, or generator hookups where the existing panel is at or near capacity | Older panels in Madison County homes were sized for a much smaller load than a modern household draws. A load calculation confirms what the panel can carry before any new circuit is added. |
| Wiring & Circuit Installation |
| Older homes flagged during inspection, renovations adding rooms or load, and properties where the existing wiring no longer meets current standards | Aluminum branch circuit wiring and knob-and-tube wiring both require specific remediation approaches. We explain what the job involves before any work starts. |
| Outlet & Switch Installation |
| Homeowners adding outlets to a room, replacing outdated devices, or upgrading to GFCI protection in kitchens, baths, and outdoor areas | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. If your home predates those requirements, we can bring those areas up to current standard. |
| Lighting Installation |
| Homeowners updating interior lighting or adding exterior lighting for security or outdoor living | Outdoor lighting circuits in North Alabama need weatherproof materials and proper GFCI protection. We confirm what the installation requires before the visit. |
| Breaker & Fuse Repair |
| Homes where a specific circuit keeps failing or a breaker no longer holds under normal load | A breaker that trips repeatedly is often a symptom of an overloaded circuit or a wiring fault, not just a worn breaker. We confirm which before replacing anything. |
| Electrical Safety Inspections |
| Pre-sale and post-purchase inspections, rental property reviews, and any property that has not had a formal electrical assessment in several years | An inspection documents what is in place and what needs attention. It is a practical step before a sale, after a purchase, or when a landlord needs a clear picture of a unit's condition. |
| Ceiling Fan Installation |
| Rooms without an existing ceiling fixture or where an older fan needs to be replaced | Installing a ceiling fan where no wiring currently exists requires running a new circuit or switch leg. We scope that on the call so the rate reflects the full job. |
| Surge & Lightning Protection |
| Homes with sensitive electronics, home offices, or equipment that would be costly to replace after a lightning event | Lightning activity in the Tennessee Valley is high enough that panel-level protection is a practical investment. A power strip alone does not intercept a spike before it reaches the wiring. |
| Electrical Repairs & Troubleshooting |
| Any homeowner or property manager dealing with an electrical symptom they cannot explain | We trace the symptom to the actual cause before any work begins, so the repair addresses the root problem rather than the surface sign. |
| Dedicated Appliance Circuits |
| Anyone adding a major appliance, a home workshop, or an EV charger that needs its own run back to the panel | A dedicated circuit means no other load shares the run, which protects both the appliance and the panel. We confirm the panel has room before the circuit is added. |
| Whole-Home Generator Installation |
| Madison homeowners who want critical circuits running during the extended outages that follow Tennessee Valley storm activity | A transfer switch isolates your home from the utility line when the generator runs, which protects both the equipment in your home and anyone working on the lines outside. |
| Pool & Spa Wiring |
| Madison homeowners adding a pool or spa, or those with an existing installation that needs to be brought up to current code | Pool and spa wiring has specific separation, depth, and bonding requirements that differ from standard interior work. We confirm what applies to your setup before the visit. |
Call (256) 594-9198 to go over the work, get the scope confirmed, and get a rate before anything is scheduled. We are available every day from 7:00 AM to 8:30 PM.
(256) 594-9198