Madison Electrical Company handles residential and commercial electrical work across Madison and the surrounding Tennessee Valley. Whether you need a single outlet replaced, a panel upgraded to carry a heavier load, or a generator transfer switch installed before the next storm season, we take the call and get the work scheduled. We are available every day from 7:00 AM to 8:30 PM.
Breakers that hold. Outlets that work. Lights that stay on.
Homeowners, landlords, property managers, and business owners all call us for the same basic reason: something needs to get fixed, or something needs to get added, and they want the job done right. We show up ready to work.
Electrical problems don't wait, and neither do we, which is why we take calls every day from 7:00 AM to 8:30 PM, including weekends. A dead outlet, a breaker that keeps tripping, or a burning smell near your panel are not problems to put off. We schedule prompt response, even for last-minute electrical calls, and we come prepared to diagnose the issue on the first visit.
Common repair calls we handle include:
Working here means getting the diagnosis right before the work starts. We trace the symptom to the actual cause, whether that is a faulty breaker, a loose connection, a grounding problem, or something deeper in the wiring, and we explain what we found before any work begins. We make the fix and leave it tidy.
Every home's wiring tells a different story, and older panels in Madison County often tell one that involves undersized service, outdated breakers, or a load that has grown well past what the original installation was designed to carry. If your breakers trip regularly, your lights dim when the air conditioning kicks on, or you are adding a major appliance or EV charger, it may be time to look at the panel.
We handle:
The scope of the electrical work is priced before it starts. When you call, we go over what the job involves, what it will take to do it correctly, and what the rate will be before anything gets scheduled. We'll sort the wiring and clean up after.
Calling an electrician doesn't have to be stressful, and for most installation and replacement work, the process is straightforward. You describe what you need, we confirm the scope on the call, and we get it done.
We install and replace:
Dedicated circuits for large appliances fall here too. If you are adding a dryer, a refrigerator on its own circuit, or a new kitchen appliance that needs a clean run back to the panel, we handle the circuit and the outlet together.
For any question about what a specific job costs, the answer is on the phone. We give you the rate when you call, before anything is booked.
Older homes in the Madison area sometimes carry wiring that was never designed for today's electrical load. Knob-and-tube wiring, aluminum branch circuit wiring, and undersized circuits that predate modern appliances are all jobs we handle regularly. If a home inspection flagged a wiring issue, or if you are planning a remodel and need the wiring brought up to current standards, we can scope the work and tell you exactly what is involved.
We cover:
We give straight answers about your panel and wiring. If the job is straightforward, we say so. If it is more involved, we explain why before the work starts.
North Alabama's climate shapes the electrical work that comes up most often here. Storm season runs from late spring through fall, and the Tennessee Valley sees frequent afternoon lightning and extended outages that make backup power and surge protection practical rather than optional. Outdoor living is a year-round consideration in this climate, and backyard pools and spas are common across Madison County. The three services below reflect what we see most often in this area.
When a storm knocks out power in Madison, the outage can last hours or longer. A standby generator connected through a transfer switch keeps critical circuits running without manually swapping cords or risking a backfeed into the utility line. We handle the electrical side of generator installation: the transfer switch, the dedicated circuit from the panel, the connection to the generator itself, and a capacity check to confirm the panel can carry the load. If the panel needs an upgrade first, we scope that work at the same time.
Lightning activity in the Tennessee Valley is high enough that a single power strip between your electronics and the wall is not much of a defense. Whole-home surge protection installs at the panel and intercepts voltage spikes before they reach your wiring and connected equipment. It works alongside AFCI and GFCI protection, which operate at the circuit level, to give your home multiple layers of defense. We install panel-level surge protection as a standalone job or as part of a panel upgrade.
Backyard pools and hot tubs are common in Madison, and the electrical work around water requires careful attention to GFCI protection, dedicated circuits, and proper grounding. Circuits for pool pumps, spa equipment, and underwater lighting are installed to code, and the outdoor receptacles nearby are checked and protected as part of the same job. If you are adding a pool or spa, or if an existing installation needs to be brought up to current standards, we can scope the work and confirm what it involves before anything is scheduled.
From a single GFCI outlet to a whole-home rewire, the first step is the same: a call to go over the scope and confirm the rate. That holds whether you are a homeowner, a property manager with a dozen units, or a business owner who needs a commercial panel upgraded before a tenant moves in.
We work with:
An electrical safety inspection covers the panel, the visible wiring, the grounding, the outlets, and the protection devices throughout the property. It is a practical step before a sale, after a purchase, or when a property has not had a formal review in several years. We keep you informed from diagnosis to final test, so there are no gaps in what the inspection found and what it means.
Built for homeowners. Ready for property managers. Ready for your panel.
A Level 2 home EV charger requires a dedicated 240-volt circuit, and in many cases the panel needs a capacity check before the circuit is added. We handle the full electrical scope: running the circuit from the panel, confirming the panel has room for the load, and installing either a hardwired connection or a NEMA outlet depending on your charger setup. If the panel is already at capacity, we can discuss a service upgrade as part of the same project.
EV charger installation is a common add-on when homeowners are already scheduling panel work or a rewire. If you are not sure whether your current service can handle the load, that is a question we can answer on the call.
Pricing for electrical work depends on what the job involves. A single outlet replacement is a different scope from a panel upgrade or a whole-home rewire, and the rate reflects that. When you call, we go over what you need, ask the questions that let us scope the job accurately, and give you the rate before anything is scheduled.
Factors that affect cost include the type of work, the condition of the existing wiring, whether the panel needs attention, and the scope of any circuit additions. For common jobs like ceiling fan installation, outlet replacement, EV charger circuits, or panel upgrades, we can give you a clear picture on the phone.
We are available every day from 7:00 AM to 8:30 PM. Call when the job comes up, and we will work through what it involves and what it costs before you commit to anything.
A burning smell near an outlet or panel is a sign that something is overheating, whether that is a loose connection, an overloaded circuit, or a component that has reached the end of its service life. It is not a problem to put off. Call and describe what you are noticing, including whether the smell is constant or comes and goes, and we will scope a diagnostic visit.
Common signs include breakers that trip regularly, lights that dim when a large appliance kicks on, a panel that feels warm to the touch, and breakers that will not reset or that reset but trip again quickly. Older panels in Madison County homes that have not been upgraded are also worth having assessed if you are adding load. A panel inspection gives you a clear picture of where things stand.
A transfer switch isolates your home's circuits from the utility line when the generator is running. Without one, backfeeding is a real hazard to utility workers and to the equipment in your home. We install the transfer switch, connect it to the panel, and run the dedicated circuit the generator needs so the system operates correctly when the power goes out.
Whole-home surge protection is installed at the panel and intercepts voltage spikes before they reach your wiring and connected equipment. It covers every circuit in the house, including hardwired appliances and HVAC equipment circuits, not just the devices plugged into a power strip. We install it as a standalone job or as part of a panel upgrade.
Pool and spa wiring requires dedicated circuits for the pump and equipment, GFCI protection near the water, and wiring that meets specific separation and depth requirements. These are not optional details. We run the circuits, install the required protection, and wire the exterior lighting around the pool area to current code. If an existing installation needs to be brought up to standard, we scope that work on the call.
A Level 2 charger requires a dedicated 240-volt circuit, and whether your panel can carry it depends on the current service size and how much capacity is already in use. We assess the panel on the call and during the visit, and if an upgrade is needed before the circuit can be added, we scope that work at the same time. You get a straight answer about what the panel can support before anything is scheduled.
The electrical side of a generator hookup includes the transfer switch, the dedicated circuit from the panel, and the connection to the generator's input. We also confirm the panel has the capacity to support the configuration before anything is connected. If the panel needs an upgrade first, we handle that as part of the same project.
Homes built before the 1980s were wired for a much smaller electrical load than a modern household draws. A panel sized for a few circuits and a handful of appliances was not designed to carry a home office, multiple large televisions, and an EV charger at the same time. Knob-and-tube and aluminum wiring add further complications. A panel assessment and, where needed, a rewiring project address the root cause rather than just the symptom.
The diagnostic process starts with the circuit involved: checking connections, testing the breaker, and working from the symptom back to the cause. GFCI and AFCI protection devices are checked as part of any thorough visit, since they are common culprits in both nuisance trips and actual faults. We explain what we find before any work begins.
Access to the work area is required, so someone needs to be present or the area needs to be accessible. For jobs that involve the panel or multiple rooms, being available to answer questions during the visit is helpful. If your situation requires specific coordination, let us know when you book.
Outdoor wiring requires weatherproof materials, proper conduit or burial depth depending on the application, and GFCI protection on any exterior outlets. Landscape lighting circuits, security lights, and pool equipment wiring all have specific requirements that differ from standard interior work. We confirm what applies to your situation before the visit and arrive with what the job needs.
A dedicated circuit runs from the panel directly to a single outlet or appliance, with no other devices sharing the load. Dryers, electric ranges, refrigerators on their own circuit, workshop equipment, and EV chargers all typically require one. We assess what the panel can support, run the circuit to the correct specification, and install the outlet to match the load.
Every job is tested under real conditions before we call it done. That means running the circuit, checking outlets and switches for correct operation, and verifying that protection devices are responding the way they should. If a test does not come back clean, we address it before leaving.
When you need an electrician in Madison, whether the job is residential, commercial, or a rental property, the next step is a phone call. We are available every day from 7:00 AM to 8:30 PM.
Call (256) 594-9198 to go over the work, get the scope confirmed, and get a rate before anything is scheduled.
Electrical work covers a wide range of jobs, from swapping a single outlet to upgrading the service entrance on a property that has outgrown its original panel. We handle all of it across Madison and the surrounding Tennessee Valley, every day from 7:00 AM to 8:30 PM. The table below lays out what each service covers, who it fits, and what is worth knowing before you call. When you are ready to move forward, a phone call is the fastest way to get a scope and a rate.
| Type of Work | What the Job Involves | When You Need It | Good to Know |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular |
| Homes adding major appliances, EV chargers, or generator hookups where the existing panel is at or near capacity | Older panels in Madison County homes were sized for a much smaller load than a modern household draws. A load calculation confirms what the panel can carry before any new circuit is added. |
| Wiring & Circuit Installation |
| Older homes flagged during inspection, renovations adding rooms or load, and properties where the existing wiring no longer meets current standards | Aluminum branch circuit wiring and knob-and-tube wiring both require specific remediation approaches. We explain what the job involves before any work starts. |
| Outlet & Switch Installation |
| Homeowners adding outlets to a room, replacing outdated devices, or upgrading to GFCI protection in kitchens, baths, and outdoor areas | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. If your home predates those requirements, we can bring those areas up to current standard. |
| Lighting Installation |
| Homeowners updating interior lighting or adding exterior lighting for security or outdoor living | Outdoor lighting circuits in North Alabama need weatherproof materials and proper GFCI protection. We confirm what the installation requires before the visit. |
| Breaker & Fuse Repair |
| Homes where a specific circuit keeps failing or a breaker no longer holds under normal load | A breaker that trips repeatedly is often a symptom of an overloaded circuit or a wiring fault, not just a worn breaker. We confirm which before replacing anything. |
| Electrical Safety Inspections |
| Pre-sale and post-purchase inspections, rental property reviews, and any property that has not had a formal electrical assessment in several years | An inspection documents what is in place and what needs attention. It is a practical step before a sale, after a purchase, or when a landlord needs a clear picture of a unit's condition. |
| Ceiling Fan Installation |
| Rooms without an existing ceiling fixture or where an older fan needs to be replaced | Installing a ceiling fan where no wiring currently exists requires running a new circuit or switch leg. We scope that on the call so the rate reflects the full job. |
| Surge & Lightning Protection |
| Homes with sensitive electronics, home offices, or equipment that would be costly to replace after a lightning event | Lightning activity in the Tennessee Valley is high enough that panel-level protection is a practical investment. A power strip alone does not intercept a spike before it reaches the wiring. |
| Electrical Repairs & Troubleshooting |
| Any homeowner or property manager dealing with an electrical symptom they cannot explain | We trace the symptom to the actual cause before any work begins, so the repair addresses the root problem rather than the surface sign. |
| Dedicated Appliance Circuits |
| Anyone adding a major appliance, a home workshop, or an EV charger that needs its own run back to the panel | A dedicated circuit means no other load shares the run, which protects both the appliance and the panel. We confirm the panel has room before the circuit is added. |
| Whole-Home Generator Installation |
| Madison homeowners who want critical circuits running during the extended outages that follow Tennessee Valley storm activity | A transfer switch isolates your home from the utility line when the generator runs, which protects both the equipment in your home and anyone working on the lines outside. |
| Pool & Spa Wiring |
| Madison homeowners adding a pool or spa, or those with an existing installation that needs to be brought up to current code | Pool and spa wiring has specific separation, depth, and bonding requirements that differ from standard interior work. We confirm what applies to your setup before the visit. |
What causes flickering or dimming lights, and when should I call an electrician?
Flickering that happens in one room usually points to a loose connection, a failing fixture, or a switch on its way out. Flickering that affects multiple rooms or the whole house is a different situation: it can indicate a problem at the panel, a loose service connection, or a circuit that is carrying more load than it was designed for. Either way, if the flickering is consistent or getting worse, it is worth a call. We trace the symptom before recommending any repair.
Is electrical work in Madison permitted and inspected?
Permit and inspection requirements depend on the type of work and where the property sits. Panel upgrades, service-entrance work, new circuits, and rewiring projects typically require a permit. Smaller repairs and direct replacements often do not. When you call, we go over what the job involves and confirm whether a permit applies to your situation before anything is scheduled.
How do I know if my home is ready for the added electrical load of a new appliance or workshop?
The short answer is a load calculation. We look at the current service size, how much capacity is already committed, and what the new equipment will draw. If the panel has room, we add the circuit. If it does not, we scope an upgrade at the same time. You get a straight answer about what the panel can support before any work begins.
Faults Traced Before Anything Is Replaced
We identify the actual cause of an electrical problem before recommending a repair. That means the fix addresses the root issue, not just the symptom that showed up first.
What are the risks of warm or buzzing outlets, and what should I do?
A warm outlet usually means a loose connection, an overloaded circuit, or a device that is drawing more current than the wiring can safely carry. A buzzing sound from an outlet or switch often points to a loose wire or a failing device. Both are signs that something needs attention before it becomes a bigger problem. Describe what you are noticing when you call and we will scope a diagnostic visit.
What should I know about GFCI protection in kitchens, bathrooms, and outdoor areas?
GFCI protection is required in any area where water and electricity are close together: kitchens, bathrooms, garages, and outdoor receptacles. If your home predates the current code requirements, those areas may not have the protection they need. We check GFCI devices as part of any thorough visit and can add or replace them as a standalone job if that is what is needed.
How long does a panel upgrade or service upgrade typically take?
A straightforward panel replacement, where the service size is staying the same and no service-entrance work is needed, usually takes the better part of a day. A service upgrade from 100 amps to 200 amps involves the panel, the service entrance, and coordination with the utility, which can extend the timeline. We go over the scope on the call so you have a realistic picture before anything is scheduled.
Scope Agreed Before the Panel Is Opened
The scope of the electrical work is priced before it starts. When you call, we go over what the job involves and confirm the rate before anything is scheduled.
When should I call an electrician instead of attempting a repair myself?
Replacing a light switch or a standard outlet is work some homeowners handle themselves. Anything that involves the panel, new wiring, a dedicated circuit, or a symptom you cannot clearly trace, such as a breaker that keeps tripping or an outlet that stopped working for no obvious reason, is worth a call. The risk of getting it wrong is not just a failed repair: it is a wiring condition that is harder to diagnose later.
What does surge protection at the panel cover that a power strip does not?
A power strip surge protector sits between one outlet and the devices plugged into it. A panel-level surge device intercepts voltage spikes before they reach any circuit in the house, including hardwired appliances and equipment that is not plugged into a strip at all. In a region with active summer lightning, the panel-level device is the more complete answer. We install it as a standalone job or as part of a panel upgrade.
Older and Newer Wiring Both Handled
From knob-and-tube remediation in a pre-war home to a new dedicated circuit in a recently built house, we work with what is already in place and explain what the job requires before we begin.
What concerns come with aluminum branch circuit wiring in older homes?
Aluminum branch circuit wiring, which was common in homes built in the 1960s and 1970s, expands and contracts differently than copper and can loosen at connections over time. That loosening is a heat source. The fix is not always a full rewire: in some cases, approved connectors or devices rated for aluminum wiring address the connection points. We assess what is in place and explain the options before any work starts.
How is grounding and bonding handled in an older home?
Older homes were sometimes wired without a grounding conductor in the branch circuits, or with a grounding system that does not meet current standards. Proper grounding gives fault current a safe path back to the panel, which protects both the equipment and the people using it. We check grounding as part of a safety inspection and can scope the work needed to bring it up to current standard if that is what the assessment shows.
How do I know what size generator I need for my home?
Generator sizing depends on which circuits you want to keep running during an outage: the whole house, or just the critical loads like the refrigerator, lighting, and a few outlets. We go over that on the call, confirm what the panel can support, and scope the transfer switch and circuit work that the installation requires. If the panel needs an upgrade to handle the configuration, we include that in the same assessment.
Call (256) 594-9198 to go over the work, get the scope confirmed, and get a rate before anything is scheduled. We are available every day from 7:00 AM to 8:30 PM.
(256) 594-9198